Herringbone Shower Wall Panels by MirroFlex

Get a Herringbone Tile Shower Wall With Less Work

Herringbone wall tile just happens to be one of the hottest trends in home design today. The herringbone wall tile pattern is simply an arrangement of rectangular tiles. To achieve a herringbone wall tile pattern yourself, you'll need to grout the walls and lay down rectangular tile in a pattern that resembles the skeleton of a herring. Using a herringbone pattern will often require far more cuts than a straight set of tiles or those placed in an offset pattern, which will mean that you'll need to buy extra tiles, adding to the cost of this project. But there's a better way to get this great look in your bathroom: Use our herringbone shower tile panels and you'll save a bundle and save time, since they're far easier to install than ceramic tile and much more affordable.

MirroFlex - Downloadable Catalog

Why Use Herringbone Bathroom Wall Tile Panels?

Using Herringbone tile in the shower is an ideal choice because it adds visual interest to a small space without looking too cluttered. Our herringbone tiles and tub surround kits are also practical: They're durable, non-porous, grout-free, and easy to install and maintain. These herringbone shower tile panels are made from waterproof PVC, so they're great to use in high-moisture areas.

How to Complement the Look of Your Herringbone Wall Tile

If you have a larger bathroom, carrying the herringbone look through the space can give the room a more unified look. Our herringbone shower wall panels pair nicely with individual herringbone wall tiles: Use them to create a stylish backsplash and add a subtle visual link between the sink and shower.

How to Install a Herringbone Tub Surround

Follow these simple steps to install herringbone shower wall panels in your bathroom:

1. Bring the herringbone shower tile panels into your bathroom the day before you install them. This will allow the herringbone tile panels to acclimate to the humidity and temperature of your bathroom.
2. Remove the shower fixtures from the wall.
3. Trim your herringbone wall panels. Our shower surround panels are oversize to ensure a good fit; you'll need to measure and trim them to fit your particular shower.
4. Measure out where you need to cut spaces for the shower fixtures and drill out the holes you'll need.
5. Tape all three panels of herringbone tiles into position on your walls, just to make sure that everything fits right. Then, draw a pencil line along the tops of the panels, so you can easily see where the adhesive needs to end.
6. Take down the panels and set them aside. Then, apply adhesive to the walls.
7. Fit the panels into place. Make sure to work from the center to the edges and press evenly to remove any air bubbles.
8. Trim the J-channel moldings and use silicone adhesive to apply them to the front edges of your herringbone tiles.
9. Let the herringbone wall tiles dry, then add silicone caulk along the line where the panels meet the tub.
10. Put back the shower fixtures.

Project Showcase

• 

  133-HERR-KIT - Gloss White
  Installed in Bathroom
• 

  133-HERR-KIT - Bermuda Bronze
  Installed in Bathroom
• 

  133-HERR-KIT - Antique Bronze
  Installed in Bathroom
• 

  133-HERR-KIT - Galvanized
  Installed in Bathroom
• 

  133-HERR-KIT - Travertine
  Installed in Bathroom
• 

  133-HERR-KIT - Gloss White
  Installed in Bathroom